Article

Air Break Switches Are Getting Smarter as US and Canadian Utilities Modernize Their Networks

Written By: Komal Ishaq
Published On: November 18, 2026

Article

Air Break Switches Are Getting Smarter as US and Canadian Utilities Modernize Their Networks

Written By: Komal Ishaq
Published On: November 18, 2026

Air break switches are among the most basic components of the overhead distribution network. They are also becoming more important and more sophisticated as utilities in the US and Canada deal with rising demand, wildfire risk and the growth of distributed energy. 

An air break switch (ABS) is a manually or motor-operated switch used in medium-voltage overhead distribution networks to isolate or connect all three phases of a circuit. The focus here is the three-phase, gang-operated overhead ABS. 

Steady growth in both markets 

Between 2024 and 2030, the US air break switch market is expected to grow at around 7% CAGR in revenue, with Canada close behind at about 6.4%. Demand for reclosers, which often work alongside air break switches, is rising for many of the same reasons. 

What is driving demand in the US 

  • Data center growth: The rapid build-out of data centers creates concentrated electricity demand across transmission and distribution systems. Utilities are responding by building dedicated or reinforced medium-voltage feeders, which need air break switches and reclosers to enable remote fault detection, automatic reclosing and feeder sectionalization. 
  • Rising electricity consumption: Growing demand is pushing utilities to reinforce distribution feeders, particularly in areas with expanding load centers. 
  • Wildfire mitigation: States including California, Oregon and Colorado have introduced aggressive wildfire hardening and vegetation management programs. These focus on sectionalizing networks and automating fault isolation to limit the geographic scope of outages. 
  • Grid automation investment: Programs such as Alabama Power’s 4,000-unit recloser initiative and Umatilla Electric Cooperative’s recloser installation program are adding to demand. 
  • Utility standards: Utilities including Duke Energy and Entergy specify 15–35 kV three-phase gang-operated air break switches in their overhead distribution standards, which drives procurement and installation. 

In Canada, the drivers are similar: grid modernization and smart grid investment, along with utility-led smart switching and reliability programs. 

Technology and design trends 

Retrofit and upgrade flexibility. Manufacturers are prioritizing solutions that extend the life of existing air break and isolating switches. ABB, for example, offers a Joslyn Hi-Voltage load interrupter that can convert standard isolating switches into load-break switches. This lets utilities upgrade existing equipment instead of replacing it entirely. 

Bidirectional capability. As distributed energy resources (DERs) spread, utilities need switches and control hardware that can manage power flowing in both directions. This capability is increasingly built into motorized air break switches, load break switches and reclosers. 

Better materials. Polymer insulators and stainless steel hardware are replacing porcelain and galvanized steel. Lower maintenance needs and better corrosion resistance make these switches well suited to humid and coastal areas such as Florida, which is encouraging upgrades there. 

Remote operation. Air break switches were traditionally operated by hand. Motor operators and SCADA integration kits now allow utilities to open and close them remotely, making them part of an automated, smarter distribution network. 

The outlook 

Data centers, wildfire risk, DER growth and utility automation programs all point in the same direction: more air break switches and reclosers on the network, and more of them motorized, remotely controlled and built to last. For manufacturers, the opportunity lies both in new installations and in upgrading the large installed base.